MO-RE Boron Nitride Mold Release Spray - 12 oz
MO-RE Boron Nitride Mold Release Spray - 12 oz
Regular price
$42.95 USD
Regular price
$45.00 USD
Sale price
$42.95 USD
Unit price
/
per
MO-RE is a high purity boron nitride solvent with exceptional release for Stainless Steel, Ceramic and Frit Casting Molds.
- Glass releases clean with no spiked edges or film left behind
- Non-Flammable
Instructions:
- Shake can vigorously for 1 min. before use to ensure proper suspension of contents.
- Hold can at a 45 degree angle during application
- Distance the can 10 to 14 inches (26-36 cm) from object
- Spray in a swift, sweeping motion beginning off surface of object, continuing off other side
- On needed basis, rotate small objects
- Allow full 5-10 min. drying time
- Apply a light second coating once first coat has completely dried
This is a self-leveling product; initial application will appear wet.
If glass is difficult to release, a full drying time was not applied.
If you find the product is leaving 'scum or glass' - too much product has been applied.
Once MO-RE is applied to ceramic molds, other primers will no longer be effective.
MO-RE can withstand firing schedules from 500 degrees F/260 degrees C to 1600 degrees F/872 degrees C.